Gradall Forklift Part

Gradall Forklift Parts - The Gradall excavator was the idea of two brothers Koop and ray Ferwerda. The excavator was established In the 1940's through World War II, when there was a scarcity of workers. Partners in a Cleveland, Ohio construction company called Ferwerda-Werba-Ferwerda, the brothers faced a huge dilemma when a lot of men left the labor force and signed up in the military, depleting existing laborers for the delicate finishing work and grading on highway projects. The Ferwerda brothers opted to build a machine which will save their company by making the slope grading work more efficient, less manual and easier.

The first excavator prototype consisted of a device with two industrial beams on a rotating platform fixed to a second-hand truck. There was a telescopic cylinder that was used to move the beams backward and forward. This enabled the fixed blade at the far end of the beams to push or pull the dirt. Soon enhancing the first design, the brothers made a triangular boom in order to add more strength. Also, they added a tilt cylinder which let the boom turn 45 degrees in both directions. A cylinder was positioned at the back of the boom, powering a long push rod to allow the machinery to be outfitted with either a blade or a bucket attachment.

The year 1992 marked a momentous year for Gradall with their launch of XL Series hydraulics, the most remarkable change in the company's excavators since their creation. These top-of-the-line hydraulics systems allowed Gradall excavators to provide high productivity and comparable power on a realistic level to traditional excavators. The XL Series ended the original Gradall equipment power drawn from gear pumps and low pressure hydraulics. These traditional systems effectively handled finishing work and grading but had a hard time competing for high productivity work.

Gradall's new XL Series excavators showed more ability to dig and lift materials. With this series, the models were produced along with a piston pump, high-pressure system of hydraulics that showed noticeable improvement in boom and bucket breakout forces. The XL Series hydraulics system was also developed with a load-sensing capability. Conventional excavators utilize an operator in order to select a working-mode; where the Gradall system could automatically adjust the hydraulic power meant for the work at hand. This makes the operator's whole work easier and likewise conserves fuel at the same time.

When the new XL Series hydraulics reached the market, Gradall was thrust into the extremely competitive industrial machinery market which are designed to tackle pavement removal, excavating, demolition and different industrial work. The introduction of the new telescoping boom helped to further improve the excavator's marketability. The telescoping boom gives the excavator the ability to work in low overhead areas and to better position attachments.

Click to Download the pdf

Forklift Parts

Axle Tech Part

Axle Tech Parts - AxleTech International is a leading provider in the world of specialty vehicle drive-train systems and parts along with off highway vehicles. The company prides itself on being its customers' chosen supplier. AxleTech strives to meet and exceed their clients' expectations for technology, delivery, quality and service. They believe in working in an environment which encourages the...

More

---

Mast Chain

Mast Chains - Used in different applications, leaf chains are regulated by ANSI. They could be used for forklift masts, as balancers between counterweight and heads in some machine devices, and for low-speed pulling and tension linkage. Leaf chains are occasionally even referred to as Balance Chains. Features and Construction Leaf chains are actually steel chains with a simple link...

More

---

Adjustable Jib

Adjustable Jibs - Lift truck jibs are actually some of the most helpful tools a construction firm can spend money on for moving and lifting industrial equipment on a job site. Forklift jib boom attachments are really cheaper as opposed to jib cranes. They're capable of carrying out practically the very same tasks at a fraction of the cost. Using...

More

---

Ingersoll Rand Forklift Part

Ingersoll Rand Forklift Parts - Ingersoll Rand provides products, solutions and services so as to ensure efficiency and increase the productivity within residential, industrial and commercial environments. They pride themselves in providing products to improve the comfort, security, health and safety of individuals all over the globe through their four worldwide segments. The Climate Solutions sector provides a world-class product...

More

---

Attachment for Nissan Forklifts

Nissan Forklift Attachments - Nissan prides itself on attaining complete customer fulfillment when their customer is enjoying one of their numerous trucks, cars or lift trucks. Nissan Forklift branch is a wholly owned subsidiary of Nissan Motor Co. Ltd. They are committed to offering high value and detail-oriented quality values to their customers. Incorporating a prosperous heritage combined with strong...

More

---

Part for Container Forklift

Container Forklift Parts - The lift truck is a useful piece of industrial equipment used in a variety of industrial applications so as to transfer and store materials and goods. Their innovative designs enable them to work and move in confined or tight areas. The typical function of a forklift is to be able to transfer heavy cargo in the...

More

---

Attachment for Reach Truck

Reach Truck Attachments - Reach trucks are loading devices used by different types of companies that preserve a storage facility or circulation center involving the arrangement of finished merchandise and supplies on pallets which are inserted into elevated shelving units. This mechanism provides simple and reliable retrieval of the loaded pallets whilst ensuring efficient storage of merchandise that are not...

More

---

Cushion Tire Forklift Attachment

Cushion Tire Forklift Attachment - Cushion tires are a firm tire with a smooth profile. Its' tread is attached to a steel ring so as to shape the tire, and the tire is pressed onto a hub which is connected to the forklift. These tires are perfect to use in smooth floor warehouses and are accessible in several polyurethane or...

More

---